Staenis floor construction systems

Compound leveling grid (1-5 cm)

When using (fast-drying) screed or leveling compound (egaline).

The Staenis Levelling Grid is a unique solution that significantly simplifies the installation of self-levelling compound and bonded (fast-drying) screed. With an adjustable range from 10 mm to 50 mm, this system makes it easy to create a flat, reinforced, and stable substrate for all types of floor finishes. Both professionals and DIYers benefit from the many advantages, such as time savings and better protection of the floor finish against cracks and fractures. Moreover, using screed as a bonded screed in combination with the Staenis Levelling Grid is significantly cheaper to install compared to self-levelling compound, resulting in additional cost savings.

Discover the leveling grid

Screed grid (5-13 cm)

When applied with screed, insulation screed, or drainage mortar. For floors that will be tiled or other traditional finishes.

The Staenis Screed Grid provides a guaranteed crack-free screed, eliminates the need for reinforcement mesh or decoupling mats, saves expansion joints of up to 200 m² surface without visual breaks, has an adjustable range of 5-13 cm (plus OSB thickness if desired) for screed, insulation screed or drainage mortar, and combines rapid installation with perfect flatness, sound insulation and long-lasting stability — ideal for those looking for quality, time saving and a sustainable result.

Discover the screed grid

Drying floor grid (from ±6.3 cm)

For circular dry floors with OSB/Durelis plating and dry (load-bearing or non-load-bearing) fillers.

The Staenis Dry Floor Grid is an adjustable wooden grid on which you can quickly create a flat, stable and removable floor structure. Combine with load-bearing granules (aerated concrete) or non-load-bearing insulation (such as rock wool/EPS/cork – with reinforced grid). Afterwards, cover with OSB or Durelis and finish with laminate, multi-layer parquet, etc. Ideal for attics and renovations and distinctively circular/reusable.

Height adjustment: ±4.5–9 cm as standard, extendable to 13 cm with extension legs. The fiber-reinforced (green) slats and legs are extra stiff; with non-load-bearing filling, 8 additional legs/m² are no longer necessary. Fiber-reinforced legs can handle high point loads.

Discover our dry floors

Circofloor system (9-22 cm)

All-in-one insulating and sustainable floor construction system.

The Circofloor system was developed as a replacement for sprayed PUR and screed floor constructions. It offers better insulation values than sprayed PUR and insulation screed at the same height, and that for a comparable price. Moreover, it is demountable, so you can easily lay a new UTP cable, water pipe, or electrical conduit after a few years if necessary. The Circofloor system is a large Meccano system that is immediately walkable after installation. It is designed so that after applying the floor covering it is not noticeable that there is no screed floor underneath. With this system, we aim to counteract the use of cement and chemical products that are difficult to remove later.

Discover the CircoFloor system
"

What our customers say