Can I still pass with my wheelbarrow after I have laid out all the grids?

To avoid this problem, we recommend building the StaenisGrid row by row. This way, you prevent being unable to pass with your wheelbarrow and also reduce the risk of tripping over the grid.

Row by row

1. Place a row of StaenisGrids.
2. Adjust the StaenisGrid to the correct height.
3. Fill the Staenis grid with the filler.
4. Level the screed on top of the mesh.
5. Repeat until the entire area is finished.

Pre-installed

1. Place all StaenisGrids in the room.
2. Adjust all StaenisGrids to the correct height.
3. Fill the Staenis grid with the filler.
4. Level the screed on top of the mesh.
5. Repeat until the entire area is finished.

You can also lay out the entire grid and adjust it to the desired height. Then, remove a row of slats so you can pass through with your wheelbarrow.